Linseed Blue Linseed Oil Paint

TESTED. ECO FRIENDLY. WELL DOCUMENTED.

Description

Single pot system - no primer required.
Use the same paint for exterior and interior projects and for all coats.
Covers more than twice the surface area than alkyd and plastic paints.

See our notes on colour for more detail.

About Allbäck Linseed Oil Paint

Paint and protect exterior and interior surfaces without solvents.
Lasts for decades on wood, steel, iron, and plastic.
For masonry surfaces such as concrete, use Allbäck's Emulsion technique.
Add Allbäck Zinc Oxide Additive when painting outdoors or in humid areas.

Benefits

Made for craftspeople by craftspeople for more than 40 years.
Tested and well documented.
Made with the highest quality ingredients and without solvents.
Penetrate, protect, and nourish wood from the inside out.
Superior coverage, longevity, and value.
Paint in direct sunlight, and store at any temperature.
Easy to maintain over time with Boiled Linseed Oil or Linseed Oil Wax.
Clean up with Linseed Soap and water.
For the health of the building, the craftsperson, and the environment.

Technical Details

Binder : Boiled, cold-pressed, cleaned, and sterilized linseed oil from Sweden.
Pigment : Ultramarine, Titanium dioxide, Chalk, Iron oxide.
Drier : Manganese Siccative.
Thinning : If necessary, thin with max. 5% Allbäck Purified Boiled Linseed Oil.
Dry matter : 100% by volume. Nothing evaporates from the paint.
VOCs : <5mg / L, natural oil only.
Application : Stir well. Apply thin coats with a stiff brush.
Coverage : 15 - 20 m² per litre (161 - 215 sqft per litre), depending on the substrate.
Cleaning : Allbäck Linseed Soap and water. Rinse well and allow to dry. Store brushes hanging in Allbäck Purified Raw Linseed Oil.
Drying time : Approximately 24 hours at room temperature, with good ventilation and low humidity.
NCS : S 4020-B10G

Documents

Technical Documents

Companion Guides by Sage Restoration

Safety Data Sheets