Black Pine Tar
Description
Black Pine Tar is made from Genuine Dark Pine Tar with natural black pigment added. The pigment gives a modern, matte black finish that is ideal for wooden buildings, fences, boat houses, and any outdoor surface where a strong black colour is desired. Additionally, it protects the wood against the elements, including UV rays on surfaces strongly affected by the sun.
Pine Tar has a long documented history of being used to penetrate and protect wooden surfaces outdoors, while still allowing it to breathe. Mix with Purified Linseed Oil to create a natural, black wood stain, giving better penetration and a surface that finishes matte and less sticky.
Testing
Before diving in, use the Pine Tar Test Kit to help with learning the nuances of the material for staining and protecting surfaces and to ensure you achieve the desired result. Test the colour on your particular surface, and test application methods and strategies for your particular project.
Application
Clean the surface with Linseed Soap and water to remove dust and dirt from the wood with a brush. Rinse well and allow to dry.
Apply Black Pine Tar to an absorbent surface, such as bare wood or to wood that was formerly treated with Pine Tar, natural oil, such as Purified Linseed Oil, or distemper paints such as Falun Paint. Pine Tar is best applied with a brush, so you can work the material into the wood. It is possible to spray Pine Tar after it has been warmed or diluted.
Pine Tar is a penetrating material that is not meant to build a thick film on the surface, or there is a risk of cracking over time and possibly even bleeding back out of the wood during hot weather.
Pine Tar comes concentrated and can be applied on its own or diluted. There are many old recipes. For most applications on absorbent wood, we like to mix 50/50 with Purified Linseed Oil and apply the mixture warm (approx. 60ºC / 140ºF) and to a warm surface in order to avoid the need for solvents. This helps to promote penetration into the wood for best protection. Adjust the ratio according to your project. See the Auson Technical Data Sheet below for more detail.
The approximate spread rate of this pine tar mixture is 60-100 sqft per litre, depending on the mixing ratio, density, smoothness, and overall condition of the substrate. It is also important to consider the environmental conditions. See the Auson Technical Data Sheet below for more detail.
Minimum operating temperature: 10-15ºC on the surface and in the air. Beware of invisible condensation on surfaces below 15ºC.
Always stir well before painting, since the pigment will settle near the bottom of the can during storage. Stir regularly while painting, too. This will help to ensure the pigment is evenly distributed in the can and help to ensure an even colour on the facade.
Drying can take from several days to several weeks depending on the weather and other environmental conditions as well as on the condition of the surface and its porosity.
Notes
Black Pine Tar is a product from nature, where the appearance may vary slightly from batch to batch. For larger quantities, it can be a good idea to mix several cans together for better uniformity.
Raw Linseed Oil is a deep penetrating oil that is slow to dry. It must be well absorbed by the timber and is well suited to most projects, including wooden facades and roofs.
Boiled Linseed Oil is a drying oil that can become hard and form a film on the surface after several coats and is well suited to projects where a faster drying time and harder finish is desired, such as walked-on surfaces.
Documents
{"id":786607308846,"title":"Black Pine Tar","handle":"black-pine-tar","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eBlack Pine Tar is made from \u003ca title=\"Genuine Dark Pine Tar\" href=\"\/products\/genuine-dark-pine-tar\"\u003eGenuine Dark Pine Tar\u003c\/a\u003e with natural black pigment added. The pigment gives a modern, matte black finish that is ideal for wooden buildings, fences, boat houses, and any outdoor surface where a strong black colour is desired. Additionally, it protects the wood against the elements, including UV rays on surfaces strongly affected by the sun.\u003c\/p\u003e\n\u003cp\u003ePine Tar has a long documented history of being used to penetrate and protect wooden surfaces outdoors, while still allowing it to breathe. Mix with \u003ca title=\"Purified Linseed Oil\" href=\"\/collections\/purified-linseed-oil\"\u003ePurified Linseed Oil\u003c\/a\u003e to create a natural, black wood stain, giving better penetration and a surface that finishes matte and less sticky.\u003c\/p\u003e\n\u003ch5\u003eTesting\u003c\/h5\u003e\n\u003cp\u003eBefore diving in, use the \u003ca title=\"Pine Tar Intro Kit\" href=\"\/products\/pine-tar-intro-kit\"\u003ePine Tar Test Kit\u003c\/a\u003e to help with learning the nuances of the material for staining and protecting surfaces and to \u003cstrong\u003eensure you achieve the desired result.\u003c\/strong\u003e Test the colour on your particular surface, and test application methods and strategies for your particular project.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eClean the surface with \u003ca title=\"Allbäck Linseed Soap\" href=\"\/products\/linseed-soap\"\u003eLinseed Soap\u003c\/a\u003e and water to remove dust and dirt from the wood with a brush. Rinse well and allow to dry.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eApply Black Pine Tar to an \u003cstrong\u003eabsorbent surface\u003c\/strong\u003e, such as bare wood or to wood that was formerly treated with Pine Tar, \u003c\/span\u003e\u003cspan\u003enatural oil, such as \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca title=\"Purified Linseed Oil\" href=\"\/collections\/purified-linseed-oil\"\u003ePurified Linseed Oil\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003eor distemper paints such as Falun Paint. \u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003ePine Tar is best applied with a brush\u003c\/strong\u003e, so you can work the material into the wood. It is possible to spray Pine Tar after it has been warmed or diluted.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003ePine Tar is a penetrating material\u003c\/strong\u003e that is not meant to build a thick film on the surface, or there is a risk of cracking over time and possibly even bleeding back out of the wood during hot weather.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003ePine Tar comes concentrated and can be applied on its own or diluted. \u003cstrong\u003eThere are many old recipes.\u003c\/strong\u003e For most applications on absorbent wood, we like to mix 50\/50 with \u003ca href=\"\/collections\/purified-linseed-oil\" title=\"Purified Linseed Oil\"\u003ePurified Linseed Oil\u003c\/a\u003e and apply the mixture warm (approx. 60ºC \/ 140ºF) and to a warm surface in order to avoid the need for solvents. This helps to promote penetration into the wood for best protection. Adjust the ratio according to your project. \u003cmeta charset=\"utf-8\"\u003eSee the Auson Technical Data Sheet below for more detail.\u003c\/p\u003e\n\u003cp\u003eThe approximate spread rate of this pine tar mixture is \u003cstrong\u003e60-100 sqft per litre\u003c\/strong\u003e, depending on the mixing ratio, density, smoothness, and overall condition of the substrate. It is also important to consider the environmental conditions. See the Auson Technical Data Sheet below for more detail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMinimum operating temperature: 10-15ºC\u003c\/strong\u003e on the surface and in the air. Beware of invisible condensation on surfaces below 15ºC.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eAlways stir well before painting\u003c\/strong\u003e\u003cspan\u003e, since the pigment will settle near the bottom of the can during storage. Stir regularly while painting, too. This will help to ensure the\u003c\/span\u003e\u003cspan\u003e pigment is evenly distributed in the can and help to ensure an even colour on the facade.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDrying can take from several days to several weeks depending on the weather and other environmental conditions as well as on the condition of the surface and its porosity.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eNotes\u003c\/h5\u003e\n\u003cp\u003eBlack Pine Tar is a product from nature, where the appearance may vary slightly from batch to batch. For larger quantities, it can be a good idea to mix several cans together for better uniformity.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/allback-purified-raw-linseed-oil\" title=\"Allbäck Purified Raw Linseed Oil\"\u003eRaw Linseed Oil\u003c\/a\u003e is a deep penetrating oil that is slow to dry. It must be well absorbed by the timber and is well suited to most projects, including wooden facades and roofs.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/allback-purified-boiled-linseed-oil\" title=\"Allbäck Purified Boiled Linseed Oil\"\u003eBoiled Linseed Oil\u003c\/a\u003e is a drying oil that can become hard and form a film on the surface after several coats and is well suited to projects where a faster drying time and harder finish is desired, such as walked-on surfaces.\u003c\/p\u003e\n\u003ch5\u003eDocuments\u003c\/h5\u003e\n\u003cp\u003e\u003ca title=\"Technical Data Sheet - Black Pine Tar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7855\/files\/TDS-Auson-Black-Pine-Tar-EN.pdf?v=1705599249\" target=\"_blank\"\u003eTDS Black Pine Tar\u003c\/a\u003e\u003cbr\u003e\u003ca title=\"Safety Data Sheet - Black Pine Tar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7855\/files\/SDS-Auson-Black-Pine-Tar-EN.pdf?v=1705599277\" target=\"_blank\"\u003eSDS Black Pine Tar\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7855\/files\/Auson-Pine-Tar-Painting-Guide.pdf?v=1705599191\" title=\"Pine Tar Painting Guide\" target=\"_blank\"\u003ePine Tar Painting Guide\u003c\/a\u003e\u003c\/p\u003e","published_at":"2018-08-29T23:01:24-04:00","created_at":"2018-08-30T00:16:02-04:00","vendor":"Auson AB","type":"Pine Tar","tags":["Best Selling"],"price":4910,"price_min":4910,"price_max":35880,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8371768721454,"title":"0.9 L","option1":"0.9 L","option2":null,"option3":null,"sku":"60500401","requires_shipping":true,"taxable":true,"featured_image":{"id":15396317691950,"product_id":786607308846,"position":1,"created_at":"2020-11-02T21:43:23-05:00","updated_at":"2020-11-02T21:43:24-05:00","alt":"Black Pine Tar, 2.7 L","width":1024,"height":1024,"src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-3L_e849be6f-2c25-4179-97c0-c650ee02d145.jpg?v=1604371404","variant_ids":[8371768721454,8371768754222,8371768786990]},"available":true,"name":"Black Pine Tar - 0.9 L","public_title":"0.9 L","options":["0.9 L"],"price":4910,"weight":998,"compare_at_price":null,"inventory_quantity":21,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7391266605010","featured_media":{"alt":"Black Pine Tar, 2.7 L","id":7569267064878,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-3L_e849be6f-2c25-4179-97c0-c650ee02d145.jpg?v=1604371404"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":8371768754222,"title":"2.7 L","option1":"2.7 L","option2":null,"option3":null,"sku":"60500473","requires_shipping":true,"taxable":true,"featured_image":{"id":15396317691950,"product_id":786607308846,"position":1,"created_at":"2020-11-02T21:43:23-05:00","updated_at":"2020-11-02T21:43:24-05:00","alt":"Black Pine Tar, 2.7 L","width":1024,"height":1024,"src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-3L_e849be6f-2c25-4179-97c0-c650ee02d145.jpg?v=1604371404","variant_ids":[8371768721454,8371768754222,8371768786990]},"available":true,"name":"Black Pine Tar - 2.7 L","public_title":"2.7 L","options":["2.7 L"],"price":12355,"weight":2998,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7391266605034","featured_media":{"alt":"Black Pine Tar, 2.7 L","id":7569267064878,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-3L_e849be6f-2c25-4179-97c0-c650ee02d145.jpg?v=1604371404"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":8371768786990,"title":"9 L","option1":"9 L","option2":null,"option3":null,"sku":"60500556","requires_shipping":true,"taxable":true,"featured_image":{"id":15396317691950,"product_id":786607308846,"position":1,"created_at":"2020-11-02T21:43:23-05:00","updated_at":"2020-11-02T21:43:24-05:00","alt":"Black Pine Tar, 2.7 L","width":1024,"height":1024,"src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-3L_e849be6f-2c25-4179-97c0-c650ee02d145.jpg?v=1604371404","variant_ids":[8371768721454,8371768754222,8371768786990]},"available":true,"name":"Black Pine Tar - 9 L","public_title":"9 L","options":["9 L"],"price":35880,"weight":12247,"compare_at_price":null,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7391266605102","featured_media":{"alt":"Black Pine Tar, 2.7 L","id":7569267064878,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-3L_e849be6f-2c25-4179-97c0-c650ee02d145.jpg?v=1604371404"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-3L_e849be6f-2c25-4179-97c0-c650ee02d145.jpg?v=1604371404","\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar.jpg?v=1604371451","\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Artipelag.jpg?v=1604371527","\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Modern-Addition.jpg?v=1604371576","\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Modern-Ocean-House-1.jpg?v=1604371612","\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Modern-Ocean-House-2.jpg?v=1604371628","\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Modern-Ocean-House-3.jpg?v=1604371636","\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Modern-Villa.jpg?v=1604371650","\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Old-Log-House.jpg?v=1604371667","\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Ski-Lodge.jpg?v=1604371683","\/\/sagerestoration.com\/cdn\/shop\/files\/Black-Pine-Tar-3L.jpg?v=1711576358"],"featured_image":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-3L_e849be6f-2c25-4179-97c0-c650ee02d145.jpg?v=1604371404","options":["Volume"],"media":[{"alt":"Black Pine Tar, 2.7 L","id":7569267064878,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-3L_e849be6f-2c25-4179-97c0-c650ee02d145.jpg?v=1604371404"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-3L_e849be6f-2c25-4179-97c0-c650ee02d145.jpg?v=1604371404","width":1024},{"alt":"Black Pine Tar on wood.","id":1289918480430,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar.jpg?v=1604371451"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar.jpg?v=1604371451","width":600},{"alt":"Black Pine Tar on modern architecture. Artipelag Museum, Stockholm.","id":1289918218286,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Artipelag.jpg?v=1604371527"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Artipelag.jpg?v=1604371527","width":600},{"alt":"Black Pine Tar for modern addition on old limestone house.","id":1289918251054,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Modern-Addition.jpg?v=1604371576"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Modern-Addition.jpg?v=1604371576","width":600},{"alt":"Black Pine Tar on modern oceanside house, Sweden.","id":1289918283822,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Modern-Ocean-House-1.jpg?v=1604371612"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Modern-Ocean-House-1.jpg?v=1604371612","width":600},{"alt":"Black Pine Tar on modern oceanside house, Sweden.","id":1289918316590,"position":6,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Modern-Ocean-House-2.jpg?v=1604371628"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Modern-Ocean-House-2.jpg?v=1604371628","width":600},{"alt":"Black Pine Tar on modern oceanside house, Sweden.","id":1289918349358,"position":7,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Modern-Ocean-House-3.jpg?v=1604371636"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Modern-Ocean-House-3.jpg?v=1604371636","width":600},{"alt":"Black Pine Tar on modern villa, Sweden.","id":1289918382126,"position":8,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Modern-Villa.jpg?v=1604371650"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Modern-Villa.jpg?v=1604371650","width":600},{"alt":"Black Pine Tar on old log house, Sweden.","id":1289918414894,"position":9,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Old-Log-House.jpg?v=1604371667"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Old-Log-House.jpg?v=1604371667","width":600},{"alt":"Black Pine Tar on ski lodge, Sweden.","id":1289918447662,"position":10,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Ski-Lodge.jpg?v=1604371683"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/sagerestoration.com\/cdn\/shop\/products\/Black-Pine-Tar-Ski-Lodge.jpg?v=1604371683","width":600},{"alt":null,"id":23361498841134,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/sagerestoration.com\/cdn\/shop\/files\/Black-Pine-Tar-3L.jpg?v=1711576358"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/sagerestoration.com\/cdn\/shop\/files\/Black-Pine-Tar-3L.jpg?v=1711576358","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eBlack Pine Tar is made from \u003ca title=\"Genuine Dark Pine Tar\" href=\"\/products\/genuine-dark-pine-tar\"\u003eGenuine Dark Pine Tar\u003c\/a\u003e with natural black pigment added. The pigment gives a modern, matte black finish that is ideal for wooden buildings, fences, boat houses, and any outdoor surface where a strong black colour is desired. Additionally, it protects the wood against the elements, including UV rays on surfaces strongly affected by the sun.\u003c\/p\u003e\n\u003cp\u003ePine Tar has a long documented history of being used to penetrate and protect wooden surfaces outdoors, while still allowing it to breathe. Mix with \u003ca title=\"Purified Linseed Oil\" href=\"\/collections\/purified-linseed-oil\"\u003ePurified Linseed Oil\u003c\/a\u003e to create a natural, black wood stain, giving better penetration and a surface that finishes matte and less sticky.\u003c\/p\u003e\n\u003ch5\u003eTesting\u003c\/h5\u003e\n\u003cp\u003eBefore diving in, use the \u003ca title=\"Pine Tar Intro Kit\" href=\"\/products\/pine-tar-intro-kit\"\u003ePine Tar Test Kit\u003c\/a\u003e to help with learning the nuances of the material for staining and protecting surfaces and to \u003cstrong\u003eensure you achieve the desired result.\u003c\/strong\u003e Test the colour on your particular surface, and test application methods and strategies for your particular project.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eClean the surface with \u003ca title=\"Allbäck Linseed Soap\" href=\"\/products\/linseed-soap\"\u003eLinseed Soap\u003c\/a\u003e and water to remove dust and dirt from the wood with a brush. Rinse well and allow to dry.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eApply Black Pine Tar to an \u003cstrong\u003eabsorbent surface\u003c\/strong\u003e, such as bare wood or to wood that was formerly treated with Pine Tar, \u003c\/span\u003e\u003cspan\u003enatural oil, such as \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca title=\"Purified Linseed Oil\" href=\"\/collections\/purified-linseed-oil\"\u003ePurified Linseed Oil\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003eor distemper paints such as Falun Paint. \u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003ePine Tar is best applied with a brush\u003c\/strong\u003e, so you can work the material into the wood. It is possible to spray Pine Tar after it has been warmed or diluted.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003ePine Tar is a penetrating material\u003c\/strong\u003e that is not meant to build a thick film on the surface, or there is a risk of cracking over time and possibly even bleeding back out of the wood during hot weather.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003ePine Tar comes concentrated and can be applied on its own or diluted. \u003cstrong\u003eThere are many old recipes.\u003c\/strong\u003e For most applications on absorbent wood, we like to mix 50\/50 with \u003ca href=\"\/collections\/purified-linseed-oil\" title=\"Purified Linseed Oil\"\u003ePurified Linseed Oil\u003c\/a\u003e and apply the mixture warm (approx. 60ºC \/ 140ºF) and to a warm surface in order to avoid the need for solvents. This helps to promote penetration into the wood for best protection. Adjust the ratio according to your project. \u003cmeta charset=\"utf-8\"\u003eSee the Auson Technical Data Sheet below for more detail.\u003c\/p\u003e\n\u003cp\u003eThe approximate spread rate of this pine tar mixture is \u003cstrong\u003e60-100 sqft per litre\u003c\/strong\u003e, depending on the mixing ratio, density, smoothness, and overall condition of the substrate. It is also important to consider the environmental conditions. See the Auson Technical Data Sheet below for more detail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMinimum operating temperature: 10-15ºC\u003c\/strong\u003e on the surface and in the air. Beware of invisible condensation on surfaces below 15ºC.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eAlways stir well before painting\u003c\/strong\u003e\u003cspan\u003e, since the pigment will settle near the bottom of the can during storage. Stir regularly while painting, too. This will help to ensure the\u003c\/span\u003e\u003cspan\u003e pigment is evenly distributed in the can and help to ensure an even colour on the facade.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDrying can take from several days to several weeks depending on the weather and other environmental conditions as well as on the condition of the surface and its porosity.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eNotes\u003c\/h5\u003e\n\u003cp\u003eBlack Pine Tar is a product from nature, where the appearance may vary slightly from batch to batch. For larger quantities, it can be a good idea to mix several cans together for better uniformity.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/allback-purified-raw-linseed-oil\" title=\"Allbäck Purified Raw Linseed Oil\"\u003eRaw Linseed Oil\u003c\/a\u003e is a deep penetrating oil that is slow to dry. It must be well absorbed by the timber and is well suited to most projects, including wooden facades and roofs.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/allback-purified-boiled-linseed-oil\" title=\"Allbäck Purified Boiled Linseed Oil\"\u003eBoiled Linseed Oil\u003c\/a\u003e is a drying oil that can become hard and form a film on the surface after several coats and is well suited to projects where a faster drying time and harder finish is desired, such as walked-on surfaces.\u003c\/p\u003e\n\u003ch5\u003eDocuments\u003c\/h5\u003e\n\u003cp\u003e\u003ca title=\"Technical Data Sheet - Black Pine Tar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7855\/files\/TDS-Auson-Black-Pine-Tar-EN.pdf?v=1705599249\" target=\"_blank\"\u003eTDS Black Pine Tar\u003c\/a\u003e\u003cbr\u003e\u003ca title=\"Safety Data Sheet - Black Pine Tar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7855\/files\/SDS-Auson-Black-Pine-Tar-EN.pdf?v=1705599277\" target=\"_blank\"\u003eSDS Black Pine Tar\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7855\/files\/Auson-Pine-Tar-Painting-Guide.pdf?v=1705599191\" title=\"Pine Tar Painting Guide\" target=\"_blank\"\u003ePine Tar Painting Guide\u003c\/a\u003e\u003c\/p\u003e"}
Black Pine Tar
Sale price$49.10
A
I have a photos I wanted to send you ... it's of the soap I made using your amazing pine tar. Your product was wonderful to work with and the 8 bars I made are already sold once they have cured. I will be a repeat customer for sure.
D
Wish it was just a little bit darker. I'm used to the more concentrated kind with much more carbon. But beyond that it worked great! Used it on a woodworking project, rifle stock, and several other things. Wood was so thirsty it really absorbed without dilution.
T
Good
M
Using the recommended 50/50 mixture of pine tar and linseed oil the results turned out to be a very dark brown, too dark for my desired outcome. Pine tar has a very strong odor that lasts for awhile, that I remember from waxing hickory based XC skis.
J
We used the pine tar and boiled linseed oil (50/50) and after seeing it on a neighbors deck were afraid it was going to look too dark. We pressed ahead anyway and were incredulous as to how spectacular the finished deck looked after two coats. We applied the first coat then let is sit a week before applying the second coat. The second coat required 8 days to dry on the side that gets all day sun, and the side that gets only half a day's sun required two full weeks to dry. Admittedly there were two thunderstorms with rain and hail during the drying process which probably slowed the process.
