Green Pine Tar is made from Genuine Dark Pine Tar with natural green pigment added, which ensures a lovely matte colour in addition to protection from rot, mildew and drying-out. The classic green hue is ideal for wooden buildings, fences, boat houses, and any outdoor surface where a strong green colour is desired. Additionally, it protects the wood against the elements, including UV rays on surfaces strongly affected by the sun.
Pine Tar has a long documented history of being used to penetrate and protect wooden surfaces outdoors, while still allowing it to breathe. Mix with Purified Linseed Oil to create a natural, green wood stain, giving better penetration and a surface that finishes matte and less sticky.
Before diving in, use thePine Tar Intro Kitto help with learning the nuances of the material for staining and protecting surfaces as well as for testing application methods and strategies for a particular project.
Apply Green Pine Tar to bare wood or to wood that was formerly treated with Pine Tar, natural oil, such as Purified Linseed Oil, or distemper paints such as Falun Paint.
Clean the surface with Linseed Soap and water to remove dust and dirt from the wood with a brush. Rinse well and allow to dry.
Pine Tar comes concentrated, and there are many old recipes for dilution, but we like to mix 50/50 with Purified Linseed Oil and apply the mixture warm (approx. 60ºC) and to a warm surface in order to avoid the need for solvents. This helps to promote penetration into the wood for a long-lasting result. Adjust the ratio according to your project. See the Auson Technical Data Sheet below for more detail.
The approximate spread rate of this pine tar mixture is 60-100 sqft per litre, depending on the mixing ratio, density, smoothness, and overall condition of the substrate. It is also important to consider the environmental conditions. See the Auson Technical Data Sheet below for more detail.
Minimum operating temperature: 10 - 15ºC on the surface and in the air. Beware of invisible condensation on surfaces below 15ºC.
Drying can take from several days to several weeks depending on the weather and other environmental conditions as well as on the condition of the surface and its porosity.
Green Pine Tar is a product from nature, where the appearance may vary slightly from batch to batch. For larger quantities, it can be a good idea to mix several cans together for better uniformity.