Grey Pine Tar Vitriol Test Kit
Free shipping on this product
This item qualifies for free shipping. See our Shipping Policy for more details.
Description
This test kit is designed to help with learning the nuances of the Grey Pine Tar Vitriol material for staining and protecting surfaces as well as for testing application methods and strategies for a particular project before diving in.
The kit is ideal for anyone at any level who wants to learn the material and do tests before proceeding with a project.
Pine Tar has a long documented history of being used to penetrate and protect wooden surfaces outdoors, while still allowing it to breathe. This product is already pre-mixed with a high-quality gum turpentine to give better penetration and a surface that finishes matte and less sticky.
Kit Contents
- 100 mL Grey Pine Tar Vitriol
- 1-inch Natural Bristle Chip Brush
Application
Apply Grey Pine Tar Vitriol to new, untreated wood or to wood that was formerly treated with plain iron vitriol.
Clean the surface with Linseed Soap and water to remove dust and dirt from the wood with a brush. Rinse well and allow to dry.
Grey Pine Tar Vitriol comes diluted with a high-quality gum turpentine, so it is ready to use right out of the can. This helps to promote penetration into the wood for a long-lasting result. Stir well before use to ensure the pigment is well mixed.
The approximate spread rate of this premixed Grey Pine Tar Vitriol is 60-100 sqft per litre, depending on the density, smoothness, and overall condition of the substrate. It is also important to consider the environmental conditions. See the Auson Technical Data Sheet below for more detail.
Minimum operating temperature: 10-15ºC on the surface and in the air. Beware of invisible condensation on surfaces below 15ºC.
Drying can take from several days to several weeks depending on the weather and other environmental conditions as well as on the condition of the surface and its porosity.
Note
Grey Pine Tar Vitriol is a product from nature, where the appearance may vary slightly from batch to batch. For larger quantities, it can be a good idea to mix several cans together for better uniformity.
Documents
Visit our Documents & Knowledge page for more information on our Pine Tar and Linseed Oil products:
- Product Details
- Technical Data Sheets (TDS)
- Safety Data Sheets (SDS)
- Publications
This is just what I was looking for. The quality is outstanding.
I use it to make cold process pine tar soap. Absolutely wonderful.
-
Using this on a 1928 log cabin in northern Minnesota has proven to be a really effective covering for logs that are exposed to northeast winds coming off of Lake Superior. It also provides protection against snow that gets compacted against the logs. Our family is very happy with the results
I prepared all shingles and clapboard before contractor applied to outside of house as original shingles were being replaced. No need now for repainting the outside of the house which is exposed to extreme weather on the Atlantic coast. This stain is a perfect solution! Only the window and door trim is painted with Sage linseed oil paints with addition of zinc oxide for sun protection.
