Allback Zinc Oxide Additive

Allback Zinc Oxide Additive

Regular price $23.00

Zinc Oxide is known to have mildew retarding properties and is useful in humid or wet climates.

When painting surfaces that are exposed to various kinds of mould, Allback Zinc Oxide can be added to all Allback paints, to a maximum of 20%.

Allback's Zinc Oxide additive is made from zinc oxide powder dispersed in Purified Boiled Linseed Oil.

Note: When added to the linseed oil paint the cost per volume or per area of the paint does not change.

Binder: Boiled, cold-pressed, cleaned, and sterilized linseed oil from Sweden.
Pigment: Zinc oxide.
Drier: Manganese Siccative.
Thinning: If necessary, thin with max. 5% Allback Purified Boiled Linseed Oil.
Dry matter: 100% by volume. Nothing evaporates from the paint.
VOCs: <5mg / L, natural oil only.
Application: Stir well. Apply thin coats with a stiff brush.
Coverage: 15 - 20 m² per litre (161 - 215 sqft per litre), depending on the substrate.
Cleaning: Allback Linseed Soap and water. Rinse well and allow to dry. Store brushes hanging in Allback Purified Raw Linseed Oil.
Drying time: Approximately 24 hours at room temperature, with good ventilation and low humidity.