{"product_id":"red-pine-tar","title":"Red Pine Tar","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eRed Pine Tar is made from \u003ca href=\"\/en-us\/products\/genuine-dark-pine-tar\" title=\"Genuine Dark Pine Tar\"\u003eGenuine Dark Pine Tar\u003c\/a\u003e with natural red oxide pigment added. The pigment gives a classic, matte red finish that is so traditional in Sweden for hundreds of years, and it is also finding popularity on modern structures, bridges, and any outdoor surface where a strong red colour is desired. Additionally, it protects the wood against the elements, including UV rays on surfaces strongly affected by the sun.\u003c\/p\u003e\n\u003cp\u003ePine Tar has a long documented history of being used to penetrate and protect wooden surfaces outdoors, while still allowing it to breathe. Mix with \u003ca href=\"\/en-us\/collections\/purified-linseed-oil\" title=\"Purified Linseed Oil\"\u003ePurified Linseed Oil\u003c\/a\u003e to create a natural, red wood stain, giving better penetration and a surface that finishes matte and less sticky.\u003c\/p\u003e\n\u003ch5\u003eTesting\u003c\/h5\u003e\n\u003cp\u003eBefore diving in, use the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-us\/products\/pine-tar-intro-kit\" title=\"Pine Tar Intro Kit\"\u003ePine Tar Test Kit\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto help with learning the nuances of the material for staining and protecting surfaces\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e and to \u003c\/span\u003e\u003cstrong\u003eensure you achieve the desired result.\u003c\/strong\u003e\u003cspan\u003e Test the colour on your particular surface, and test application methods and strategies for your particular project.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eClean the surface with \u003ca href=\"\/en-us\/products\/linseed-soap\" title=\"Allbäck Linseed Soap\"\u003eLinseed Soap\u003c\/a\u003e and water to remove dust and dirt from the wood with a brush. Rinse well and allow to dry.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eApply Red Pine Tar to an \u003cstrong\u003eabsorbent surface\u003c\/strong\u003e, such as bare wood or to wood that was formerly treated with Pine Tar, \u003c\/span\u003e\u003cspan\u003enatural oil, such as \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"\/en-us\/collections\/purified-linseed-oil\" title=\"Purified Linseed Oil\"\u003ePurified Linseed Oil\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003eor distemper paints such as Falun Paint. \u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003ePine Tar is best applied with a brush\u003c\/strong\u003e, so you can work the material into the wood. It is possible to spray Pine Tar after it has been warmed or diluted.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003ePine Tar is a penetrating material\u003c\/strong\u003e that is not meant to build a thick film on the surface, or there is a risk of cracking over time and possibly even bleeding back out of the wood during hot weather.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003ePine Tar comes concentrated and can be applied on its own or diluted. \u003cstrong\u003eThere are many old recipes.\u003c\/strong\u003e For most applications on absorbent wood, we like to mix 50\/50 with \u003ca title=\"Purified Linseed Oil\" href=\"\/en-us\/collections\/purified-linseed-oil\"\u003ePurified Linseed Oil\u003c\/a\u003e and apply the mixture warm (approx. 60ºC \/ 140ºF) and to a warm surface in order to avoid the need for solvents. This helps to promote penetration into the wood for best protection. Adjust the ratio according to your project. \u003cmeta charset=\"utf-8\"\u003eSee the Auson Technical Data Sheet below for more detail.\u003c\/p\u003e\n\u003cp\u003eThe approximate spread rate of this pine tar mixture is \u003cstrong\u003e60-100 sqft per litre\u003c\/strong\u003e, depending on the mixing ratio, density, smoothness, and overall condition of the substrate. It is also important to consider the environmental conditions. See the Auson Technical Data Sheet below for more detail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMinimum operating temperature: 10 - 15ºC\u003c\/strong\u003e on the surface and in the air. Beware of invisible condensation on surfaces below 15ºC.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eAlways stir well before painting\u003c\/strong\u003e\u003cspan\u003e, since the pigment will settle near the bottom of the can during storage. Stir regularly while painting, too. This will help to ensure the\u003c\/span\u003e\u003cspan\u003e pigment is evenly distributed in the can and help to ensure an even colour on the facade.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDrying can take from several days to several weeks depending on the weather and other environmental conditions as well as on the condition of the surface and its porosity.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eNotes\u003c\/h5\u003e\n\u003cp\u003eRed Pine Tar is a product from nature, where the appearance may vary slightly from batch to batch. For larger quantities, it can be a good idea to mix several cans together for better uniformity.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-us\/products\/allback-purified-raw-linseed-oil\" title=\"Allbäck Purified Raw Linseed Oil\"\u003eRaw Linseed Oil\u003c\/a\u003e is a deep penetrating oil that is slow to dry. It must be well absorbed by the timber and is well suited to most projects, including wooden facades and roofs.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-us\/products\/allback-purified-boiled-linseed-oil\" title=\"Allbäck Purified Boiled Linseed Oil\"\u003eBoiled Linseed Oil\u003c\/a\u003e is a drying oil that can become hard and form a film on the surface after several coats and is well suited to projects where a faster drying time and harder finish is desired, such as walked-on surfaces.\u003c\/p\u003e\n\u003ch5\u003eDocuments\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7855\/files\/TDS-Auson-Red-Pine-Tar-EN.pdf?v=1705599249\" title=\"Technical Data Sheet - Red Pine Tar\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eTDS Red Pine Tar\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7855\/files\/SDS-Auson-Red-Pine-Tar-EN.pdf?v=1705599278\" title=\"Safety Data Sheet - Red Pine Tar\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSDS Red Pine Tar\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7855\/files\/Auson-Pine-Tar-Painting-Guide.pdf?v=1705599191\" title=\"Pine Tar Painting Guide\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ePine Tar Painting Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Auson AB","offers":[{"title":"0.9 L","offer_id":8371551141934,"sku":"60510401","price":43.0,"currency_code":"USD","in_stock":true},{"title":"2.7 L","offer_id":8371551174702,"sku":"60510473","price":107.0,"currency_code":"USD","in_stock":true},{"title":"9 L","offer_id":8371551207470,"sku":"60510556","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7855\/products\/Red-Pine-Tar-3L_e2de4961-1df6-4d47-b545-db929a3ecfe0.jpg?v=1604373459","url":"https:\/\/sagerestoration.com\/en-us\/products\/red-pine-tar","provider":"Sage Restoration","version":"1.0","type":"link"}